◆进口导轨和传动系统，配置减速结构，三相电机，三相驱动器，切割更光滑，设备运行更稳定。
◆配备高速控制系统，USB2.0接口直接输出方式，智能化软件，可直接支持Autocad,Coreldraw等软件输出。
◆大功率二氧化碳激光管，配合进口反光镜、聚焦镜片，延长使用寿命。
◆运行速度，激光能量实时可调，极大地方便客户的操作。
◆完整的水保护系统，有效保障激光管的使用寿命。
◆选配双头激光切割机，使工作效率成倍增长。
◆可选配蜂窝平台刀铝平台、红光定位系统、大功率激光管
支持PLT、BMP、DXF、DST、T100等多种格式文件输出
本机切割速度快，精度高，效果。


◆ imported rail and transmission system, the configuration of the the deceleration structure of three-phase motors, three-phase drive, cutting more smooth, more stable equipment operation.
◆ equipped with high-speed control system USB2.0 interface directly output mode, the intelligent software, can directly support Autocad, Coreldraw software output.
◆ high-power CO2 laser tube with the imported mirror, focusing lens, and prolong life.
◆ running speed, the laser energy is adjustable in real time, greatly facilitate the operation of the customer.
◆ complete water protection system, effective protection of the life of the laser tube.
◆ optional double-headed laser cutting machine efficiency exponentially.
◆ the optional cellular platform knife aluminum platform, red Positioning System, high-power laser tube
Support multiple formats PLT, BMP, DXF, DST, T100 file output
This

加工面积：(1200x900)mm

激光类型：玻璃内腔式封离CO2激光器（符合国标标准）

激光功率：/60W80w100w120w

激光管冷却：水冷

能量调节：0-100%无段控制、软件内部0-100%可调

控制及驱动：、步进电机高细分驱动
雕刻速度：0-1000mm/s

切割速度：0-600mm/s

工作电压： 220v 50HZ

定位精度：≤±0.01mm

最小成型字：汉字1.5mm   英文字母1mm

整机功率：≤500W

加工幅面：1200x900mm

工作台：升降  升降高度 500mm

工作环境：温度：0-45℃  湿度5%-95%（无凝水）

软件支持格式：PLT、DST、DXF、DWG、AI、LAS 可支持AutoCAD、CorelDRAW直接输出

Processing area: (1200x900) mm
Laser Type: Glass intracavity sealed-off CO2 laser (meet GB standard)
Laser power :/ 60W80w100w120w
Laser tube cooling: water-cooled
Energy regulation :0-100% stepless control software internally adjustable from 0-100%
Control and drive: stepper motor high Subdivision Driver
Engraving speed :0-1000mm / s
Cutting speed :0-600mm / s
Operating voltage: 220v 50HZ
Positioning accuracy: ≤ ± 0.01mm
Minimum shaping characters: Chinese character 1.5mm English letter 1mm
Total power: ≤ 500W
Processing area: 1200x900mm
Workbench: lifting height of 500mm
Working environment: Temperature :0-45 ° C Humidity 5% -95% (free of condensed water)
Software support format: PLT, DST, DXF, DWG, AI, LAS supports AutoCAD, CorelDRAW direct outpu

Model	KH-1290
Working area	120cm*90cm / 24in*16in (L*W)
Laser power	40W/60W80W100w120w
Laser type	CO2 sealed laser tube,water-cooled
Engraving speed	0-6000cm/min
Power supply	220V/50HZ , 110V/60HZ
Min. shaping character	English 1.0 x 1.0mm
Graphic format supported	BMP, PLT, DST, DXF, AI
Software supported	CorelDraw, PhotoShop, AutoCAD,TAJIMA
Driving system	2 phases stepper motor
Equipment Dimension	1320mm*1000mm*1050mm 41in*30in*38in (L*W*H)
Packing Dimension	1420mm*1010mm*1100mm 45in*33in*41in (L*W*H)
Net Weight	180kg
Optional parts	Up-down worktable, USB Port, Red light pointer, Autofocus