1.Alarm keypad/Control Unit (GSM alarm with Power Adapter)

1 Panel Setup

Alarm panel should be installed at a central location with best transmission to all the wireless sensors and accessories.Keep the pannel well away from large metal objects or household appliances with high-frequency interference,and avoid barriers such as concrete walls with metal frame insde and fire doors.

2 Connection of cables

1, Wireless Frequency: 433(MHz)           2, GSM Frequency:900/1800MHz

2. PIR Motion Infrared Detector( Battery Included )

The principle of infrared detectors is to sense people's movement through sensing infrared signals generated by bodies and the detection range is usually 5-12 meters. Infrared sensor should be installed about 2.2 meters away from ground. Aim straight at

 the detection ranges. Moreover, the infrared detector can be only installed in the room, without facing the sunshine, windows and other places where temperature is easy to change, because the installed location may influence the detection range and accuracy

3.Door / Windor Sensor( Battery Included)

 Use the random equipped double-side tape to stick a magnetic stripe on the door and affix the gate magnetic emission box on the doorframe. Pay attention to put the magnetic strip close to the side with indicator lights of the emission box during installation, assuring proper alignment and the smaller distance the better. 

1, Operation Current:8~15mA

2, Quiescent Current:3uA

3, Operation Freq:433MHz

4, Operation Temp: -10C~50C;Humidity:no more than 90%

5, Installation: less than 15mm between 2 parts.

6, Transmit Distantce:Outdoor 100M(no obsctale),Indoor:10M

1, Operation Freq:433MHz

2, 4 Button:Arm Away Mode, Arm At home Mode, Emergency Mode and Disarm Mode)

3, Sending Distantce:Outdoor 80~100M(no obsctale), Indoor:8~10M

5.Wired Siren