ELM327 Wifi

WI-FI OBD AUTO CHECKER is capable of communicating with vehicles which adopt following protocols:

1) ISO9141-2(5 baud init,10.4Kbaud)

2) ISO14230-4 KWP (5 baud init, 10.4 Kbaud)

3) ISO14230-4 KWP (fast init, 10.4 Kbaud)

4) ISO15765-4 CAN (11bit ID, 500 Kbaud)

5) ISO15765-4 CAN (29bit ID, 500 Kbaud)

6) ISO15765-4 CAN (11bit ID, 250 Kbaud)

7) ISO15765-4 CAN (29bit ID, 250 Kbaud)

8）SAE J1850 PWM (41.6 Kbaud)

9）SAE J1850 VPW (10.4 Kbaud)

-SAE J1939 CAN (29bit ID, 250*Kbaud)

-USER1 CAN (11*bit ID, 125*Kbaud)

-USER2 CAN (11*bit ID, 50*kbaud)

Scope of use：

Works with all OBD-II compliant vehicles.

Works on all 1996 to 2010 cars and light trucks sold in the United States, some 1994 and 1995 models are also ok.

By using this device, you can monitor your cars from PC, Mac, iPhone, iPad, to do inspection by yourself! It would save your money and time.

Software included in CD for Smartphone, PC and iOS (for iPhone, iPad, iTouch, Mac).

Clear trouble codes and turn off the MIL ("Check Engine" light).

Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).

How to see if your vehicle is comliant with OBD II?

Please pop the hood and look for a sticker named "VEHICLE EMISSION CONTORL INFORMATION".

Product Features：

Following are some of the parameters which could be read from the vehicle.

Vehicle Speed

RPM

Fuel Consumption*

Engine Coolant Temp

Fuel Pressure

Calculated Engine Load

Throttle Position

Intake Manifold Pressure

Air Intake Temp

Timing Advance

Mass Air Flow

Fuel Level

Barometric Pressure

EVAP System Vapor Pressure

Fuel Trim

*note: Your vehicle may not support all above parameters. How many parameters you can get is depended on the vehicle manufacturer's implementation.

Where can I get the software?

You can log on to the apple application store to get your commercial software, such as Dynolicious.

And There is a software in the CD-ROM comes along with the device. You can use this piece of software to config and test the WI-FI OBD AUTO CHECKER.

Product parameters：

Material: automotive grade plastic

SSID: WiFi_OBD

IP: 192.168.0.10

Subnet: 255.255.255.0

Range: 50 ft (Line of sight)

Antenna: Internal

Wifi Standard: 802.11a/b/g

Output protocol: RS232 serial port

Baud rate: 38400

Working voltage: 9-16V

Working current: 45 mA

Operating temperature: -40 to 100 Deg Celsius