我们是工厂！我们是工厂！我们是工厂！

如何正确使用防水补漏胶带：

切割：算好需要缝补的胶带大小，切割成所需要的尺寸。

贴片：剥掉透明的背衬，贴到干净的表面，注意边上的胶粘剂，避免沾到手指或物品上。

挤压：用力按压，清除所有的水泡或气泡，使其平整。

密封：一但贴合上去之后，强力的粘合力将导致不能重新定位，所以在贴的时候要保证快准狠。

产品尺寸：宽10cm*长1.5m,  50卷/箱， 箱规 47*38*52cm，单卷重约210g左右。

• · 本公司生产的强力防水补漏胶带，适用材质范围非常广泛（包括：PVC，亚克力，金属，铁，铜，铝，木头，陶瓷，瓷器，砖瓦，玻璃，橡胶，玻璃纤维，泥灰，美耐板，石膏，石头，清水墙，三元乙丙橡胶屋顶，一些塑料和乙烯树脂以及还有更多)，生活中应急小能手！ 
• 注意 
• 1.防水补漏胶带：适合在-6℃-50℃范围内使用，在高温条件下会发生功能性变化，温度高于93℃时，胶黏剂会变成粘稠状失去抓力，故注意产品使用环境温度！ 
• 2.以下表面CN tape无法完全发挥作用：高度塑性材料、硅化表面、油腻、油性及肮脏表面、防水排斥表面、多孔表面及一些面料。防水补漏胶带：是一种临时性应急的修补工具，不意味着永久修复！ 

 adhesive tape, the company produced strong waterproof bare applicable material range is very wide, including: PVC, acrylic, metal, iron, copper, aluminum, wood, ceramic, porcelain, brick and tile, glass, rubber, glass fiber, marl, the resistance to board, gypsum, stone, water wall, epdm roofing, some plastic and vinyl resin, and more), emergency experts in life!

· usage:

·1. Cut according to the area to be repaired and cut corresponding dimensions

·2. Take off the backing sticker and stick it on the clean surface

·3. Press hard to remove water and bubbles

·4. The sealing tape is extremely sticky, so it must be fast and accurate when used, otherwise it cannot be shifted again

Pay attention to,

, 1. Waterproof bare tape: suitable in use - 6 ℃ to 50 ℃ scope, functional happens under the condition of high temperature, temperature higher than 93 ℃, the adhesive becomes sticky and lose grip, so pay attention to the products using the environment temperature!

·2. CN tape on the following surfaces cannot fully play its role: highly plastic materials, silicified surfaces, greasy, oily and dirty surfaces, waterproof and repelled surfaces, porous surfaces and some fabrics.Waterproof tape: is a temporary emergency repair tool, does not mean permanent repair!